AC/DC High power wireless remote control switch water pump controller with manual switch KST-C210911

AC/DC High power wireless remote control switch water pump controller with manual switch

Product Technical Data:

• Product Model:KST-C210911
• Operating voltage：DC12V~48V.AC100-240V
• Working Current:AC≤80mA DC≤10mA
• Quiescent Current:≤6.6mA
• Name:Water pump wireless remote Control Switch
• RF frequency:433MHz default(315MHz optional)
• Max load:Every one channel≤30A
• Operating temperature:-40℃ - +80℃
• Receiving sensitivity:-110dBm
• Working mode:inching, self-locking, interlocking (adjustable)
• Transmitter Distance:more than 300m,decide by your remote control
• Size： Finish product:124*68*30mm

Product Applications:

• Motor applications:  Water pumps remote control switch,Timed remote control、Ventilation and heat dissipation equipment,  Airplane model、Remote control toy etc.
• Automotive modification application: Automobile lighting control, Automobile audio modifaction, Exhaust sound wave controletc.
• Smart home application: lighting, Dimming equipment control, Router, Intelligent remote control switch/timing switch for the electric appliance or power, Electric curtain, Electric clohes dreretc.
• Intelligent Alarmsystem application : all kinds of security alarm controletc.
• Intelligent access control application: Electric door,Electric telescopic door, intelligent systems and guard posts, Garage rolling gate, Electronic lock, Residential access control, etc.

Definition:

1. Inching :Controlling the receiver by one key, the switch will be turn on when you hold and press the key, and turn off when you release the key.
2. Self-locking：Controlling the receiver by one key, press the key---turn on, press the key again---turn off
3. Interlocking: Controlling the receiver by two keys(A,B), the switch will be turn on when you press A, and turn off when you press B
4. DeLay: Setting up the time as you need(5s/10s/15s/20s),the switch will be off after 5 seconds.(Only applicable to specified products)

1. Inching mode: Pressing the "on "button twice quickly and the working indicator blinks twice，Successfully switch to Inching mode.
2. Inching mode: Pressing the "on "button three times quickly and the working indicator blinks three times，Successfully switch to Inching mode.
3. Inching mode: Pressing the "on "button four times quickly and the working indicator four times，Successfully switch to Inching mode.

• Long press the "ON" button 3 seconds,the working indicator lighting,the buzzersounded 1 beep to enter the learning state,then press the remote control to send the signal,the controller received the signal and the working indicator blinks,pairing succeed.
  

• Long press the "OFF"button 8 seconds，the controller's buzzer sounded 3 beeps,delete succeed。

• Note：Once the code is cleared, it will not be restored,you need to re-learn, please exercise caution!

Note:

• Do not load the receiver in the iron box. Keep it stay away from electric motors, contactors and other electrical appliances which may cause magnetic field, and avoid remote control signal back interference.
• When you feel the distance of the remote control is significantly shortened, please replace the battery of the remote control in time (warm tips: in order to protect our living environment, do not throw the abandoned battery away. If the battery is not easy to buy in the local market, you can ask the seller to provide it free of charge, excluding the freight).
• When installing the wiring, please disconnect the power to ensure your own safety; When the relay is working, the indicator light will show; Pay attention to the remote control shock resistance learning range.
• Try not to operate the buttons of the remote controller frequently since the signal received by the chip of the wireless receiver has a response time of about one second.